Detergent Container Blow Molding Machine

Detergent Container Blow Molding Machine

Small HDPE plastic toy ball extrusion blow molding making machine for sale EBM LHB70 - MACHINE INTRODUCTIONS MODEL : Continuous Extrusion Blow Molding Machine LHB70(Single station) TARGET PRODUCT : Jerry Can,Toy ball,Toy car wheel,etc. MAX PRODUCT VOLUME : 12 Liters PLASTIC MATERIAL : HDPE, PP,...

Send Inquiry

Small HDPE plastic toy ball extrusion blow molding making machine for sale

HTII-2L5L-1.jpg

EBM LHB70 - MACHINE INTRODUCTIONS
MODEL:   Continuous Extrusion Blow Molding Machine LHB70(Single station)
TARGET PRODUCT:   Jerry Can,Toy ball,Toy car wheel,etc. 
MAX PRODUCT VOLUME:   12 Liters
PLASTIC MATERIAL:   HDPE, PP,
DELIVERY TIME:   45 Days
GUARANTEE TIME:   One Year After Delivery

Machine Model

EBM HT-12L (Single station)

Max Product Volume

12L

Suitable Material

PE,PP

Machine Size

3.8*1.8*2.8 m

Machine Weight

5 Tons

Voltage Suitable

Customer Specified

Screw Diameter

70 mm

L/D Ratio

24:1

Extruder Heating Power

14.2 KW

Number of Extruder Heating Zone

3 zone

Extrusion Motor Power

22 KW

Plasticizing Capacity

80 Kg/Hour

Clamping Force

95 KN

Platen Size

450*575 mm

Platen Opeing Stroke

200-600 mm

Max Mould Size

450*550 mm

Type of Die Head

Continuous

Head heating Power

5.7 KW

Number of Head Heating Zone

3 Zone

Max Die-pin Diameter

180 mm

Total Power

45 KW

Average Energy Consumption

31 KW

Air Pressure 

0.7 Mpa

Air Consumption

0.9 m3/min

Cooling Water Needed

60 L/min

Loading Reference

20'GP

CONTINUOUS DIE HEAD SYSTEM

Central-incoming die head with special steel: the continuous extrusion head is designed with material center in-coming type and removing the plastic melting line on the product surface, easily for material or color change, saving the time & material cost with speedy operation. According to the customer's needs,there are various kind of heads can been fixed on the machine like Single die head, Twin die head, Tri-die head, Tetra-die head, etc.

EXTRUSION SYSTEM

Gradient mixing type with high-speed energy saving design, gradually changed screw with same distance and different deep. Material of screw: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥800,brittleness≤2. Material of barrel: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥900,brittleness≤2. It include: extrusion motor, gearbox, screw and barrel covered with heater bands, cooling fans, hopper.

HYDRAULIC SYSTEM

Japan hydraulic valve+impoted sealing parts+proportional control:The main hydraulic system is mainly composed of motor, pump, pressure regulating valve block, reversing valve blocks, cylinders and oil chillers. It controls platens open & close, carriage up & down, extrusion system up & down, blow pin actions, or even spinning cut and so on.

ELECTRICAL CONTROL SYSTEM

Japan imported PLC+ automatic temperature control module+other imported electronic parts:The electrical control system is composed of operation panel, temperature control module, PLC, input & output module, proportion board, contactors, voltage stabilized source, air switches, mid relays, proximity switches, inverter and motors. The operation panel contains power switch, touch screen, alarm, hot cutter knob, auto cycle button, emergency stop button, action reversion button, extruding speed button.

CLAMPING SYSTEM

Clamping unit is composed of front & back platens, clamping unit, mould clamping hydraulic cylinders, synchronizing mechanism, with the structure of nether crank design. Platen movements open & close is assisted with linear guide rails & ball bearing sliders to increase action smoothness and position precision. The end positions & slow speed positions are controlled by travelling electric transducer.

PNEUMATIC & WATER SUPPLY SYSTEM

The pneumatic system contains air cylinder, air valves, air filters, air tubes, fast plugs and so on, for controlling the actions of head inner blowing, blow pin blowing, auto-deflashing, or pushing in & out for some special moulds. The necessary air pressure is 0.8~1.0 Mpa, air consumption is 0.8~1.0 M3/min. The water system contains water distributing blocks, ball valves, tubes, connectors and so on, for chilling the screw & barrel, hard gear box, blowing units and moulds. The necessary water pressure is 0.2~0.4 Mpa, water consumption is 0.5 m3/hour. 

ENERGY SAVE TECHNOLOGY

This kind machine fixed accumulator tank energy  saving system,lower power consumption,make the machine working more stable.Check the attached photo.

Product Layout Diagram

Production Process

Hot Tags: Detergent Container Blow Molding Machine, China, manufacturers, suppliers, factory, price
Related Products
Jiangsu Faygo Union Machinery Co.,Ltd

Copyright © Jiangsu Faygo Union Machinery Co.,Ltd All rights reserved.